WPS-12 Stainless Steel Wall Covering

Type 304 #4 satin finish smooth stainless steel wall system.

See available product options

WPS-12 stainless steel wall coverings can be utilized in virtually any commercial building. Stainless steel wall systems are well suited for kitchens and other wet environments, but they also provide strong impact protection from mobile carts, equipment, and pedestrian traffic. The WPS-12 stainless steel wall covering system consists of wall panels, inside corners, outside corners, and edge trim for a complete installation. Stainless steel wall base options are also available. WPS-12 wall panels are supplied in standard sizes and cut to fit in the field by installers, which means no prior field measuring is required. Choose from our standard options below or inquire about custom options that meet your specific project requirements.

Features:

  • Manufactured from type 304 #4 finish stainless steel (smooth)
  • Wainscot or full height installation
  • 1/2-inch offset overlapping seams
  • Inside corners, outside corners, and edge trim available for a complete installation
  • Installed with adhesive or mechanical fasteners, pre-drilled holes available
  • Other stainless steel grades and finishes available

Available options

  • SKU#:

    WPS-12

  • Material:

    Type 304 #4 satin finish stainless steel

  • Mounting Options:

    ADH-50 adhesive or mechanical fasteners

  • Standard Sizes:

    48-inch x 96-inch or 48-inch x 120-inch

  • More Info:

    WPS-12 wall panels are supplied in standard sizes and cut to fit in the field by installers. Custom sizes available. Other stainless steel grades and finishes available. Consult with factory for a recommended gauge.

WPS-12 Wainscot Wall Panel

WPS-12 Wainscot Wall Panel

WPS-12 wainscot wall panels are supplied in standard lengths of 96-inches or 120-inches and modified in the field by installers. Standard wainscot height is 48-inches. Custom heights available.

WPS-12
WPS-12 Full Height Wall Panel

WPS-12 Full Height Wall Panel

WPS-12 full height wall panels are supplied in standard 48-inch widths and modified in the field by installers. Standard full height panels are 96-inches or 120-inches tall. Custom heights available.

WPS-12
WPS-12 Inside Corner

WPS-12 Inside Corner

3 1/2-inch wing size with 1/2-inch offsets on both wings. Custom wing sizes, heights, and angles available.

WPS-12-ICG-50
WPS-12 Outside Corner

WPS-12 Outside Corner

3 1/2-inch wing size with 1/2-inch offsets on both wings. Custom wing sizes, heights, and angles available.

WPS-12-OCG-50
WPS-12 Edge Bar

WPS-12 Edge Bar

1/8-inch x 1-inch profile. Used as a top cap to finish the top edge of WPS-12 stainless steel wall covering. Can also be used to cap vertical edges. Pre-formed outside corners available.

WPS-12-EB-1
ADH-50 Adhesive

ADH-50 Adhesive

Protek ADH-50 is a one-component, low-modulus, moisture curing, advanced polymer adhesive and sealant. ADH-50 cures rapidly and delivers aggressive adhesion with most common construction substrates.

ADH-50

Select the files that you want to download and click “Download” to get the files.

Cad-drawing

dwg

Installation-instructions

pdf

Cleaning-maintenance

pdf

Roll over a color or texture sample to view a larger swatch.

Click the colors or textures required for your swatch request.

Stainless Steel

#4 finish

WPS-12 Stainless Steel Wall Covering

No custom options are available for this product.

    Note: You may upload only one PDF file (2MB file size).

    Click to browse
    or drag and drop your files


    Clear