The Protek Heat Welded Seamless Wall System is heat weldable to itself and to PVC floors resulting in a seamless, monolithic room. It is ultra-hygienic and malleable to form to inside and outside corners, and can withstand bumping of carts and other vehicles. It can be installed over existing walls and ceilings with minimal maintenance required. The Protek Heat Welded Seamless Wall System can be used as a wainscot or cover the entire wall.

White and beige, with a semi-gloss finish. Sheet sizes are 4' x 8' or 4' x 10' in a 2mm thickness (.080 Inches). Special colors, finishes, and sizes are available; please contact Protek at 1-800-598-2153 for more information.

Clean rooms, laboratories, hospitals, animal holding areas, morgues, corridors with cart traffic, bumpers for swinging doors, wet rooms, food processing areas, fermentation rooms, operating suites, burn centers, and wherever absolute hygienic cleanliness is a requirement and where walls are being marred by repeated bumping by wheeled vehicles. EXCELLENT FOR AIDS AND CANCER RESEARCH FACILITIES.

A random list, wherein chemical resistance is excellent, would include the following acids: acetic, butyric, hydrochloric, sulfuric, and silver nitrate (full resistance chart available). Protek Hygienic Wall Systems pass ASTM E-84-95 (Steiner Tunnel Test) with a flame spread under 25 and smoke developed under 450. This test method is also published under the following designations: ANSI 2.5, NFPA 255, UBC 8-1, UL723. Protek Hygienic Wall Systems conform to all BOCA requirements, are USDA approved, and listed with Underwriter's Laboratories, Inc. under multiple listing file #R16341. Protek Hygienic Wall Systems never require painting or sealer and are easily maintained by washing with a mild soap solution as necessary. 

Protek Fire-Rated Ceiling Panels are approved for use in Class 10 rated clean rooms as tested according to Federal Standard 209D. The panels also meet class 1/A fire code requirements (ASTM E-84) and USDA approved for incidental food contact. Protek Fire-Rated Ceiling Panels are extruded as a non-porous, proprietary thermoplastic alloy. The panels exhibit high rigidity (347,000 psi [2392 MPa] modulus of elasticity) and low moisture absorption, and resist a wide range of concentrated chemicals (including corrosives, allowing frequent cleaning using harsh cleansers with no staining or fading). Protek Ceiling Panels are monolithic, contain no fibers, will not crack, break, chip, flake, or deteriorate over time preventing panel-related contamination of the environment. They also withstand tough treatment by maintenance personnel during repeated removal/cleaning/re-installation cycles. Standard panels in the .080" thickness offer an integral white color with smooth nap surface texture, and are available in 23 3/4" squares or 23 3/4" x 47 3/4" rectangular sizes for use with all standard ceiling grid systems. Applications for Protek Fire-Rated Ceiling Panels include clean rooms, computer rooms, laboratories, food, dairy, and pharmaceutical plants and other environments where sterility or an otherwise high degree of cleanliness is required.